NW 40 fine filter glass, 20 kg bag
Technical specifications:
High-purity technical glass for water filtration.
Composition: SiO₂ (74%), Na₂O (13%), CaO (10.5%), Al₂O₃ (1.3%), K₂O (0.3%), SO₃ (0.2%), MgO (0.2%), Fe₂O₃ (0.04%), TiO₂ (0.01%).
Colour: Multicoloured glass.
Particle density: 2.490 kg/m³.
Bulk density: 1.335 kg/m³.
Particle size: 0.6–1.2 mm.
Packaging: 20 kg bag made from FSC-certified recycled paper with a scratch-resistant, UV-resistant PE inner lining.
Precautions: Do not ingest.
Incompatibilities: None detected.
Installation: Install the NW40 High Calibration filter glass in the filter and carry out a 5-minute backwash before commissioning.
Recommendations: Required quantity of NW40 according to the filter manufacturer’s specifications: 20% less weight is required than with silica sand. Before installing in the filter, check the condition of the collectors and, preferably, replace them.
Maximum permissible flow rate: 90 m³/h/m².
Typical operating flow rate: Between 15 and 50 m³/h/m².
Optimum air flow injection: 50 m³/h/m².
Minimum backwash flow rate: 40 m³/h/m².